Dedicated Mircros Digital Sprite 2 Guia de preparacion descargar pdf (Pagina 72)

DS2 Network Guide

It is possible to integrate the unit into a system where text information can be stored with the

relevant images for review at a later date, e.g. Retail, Finance.

The unit can be congured to search for specic text information, allowing for fast retrieval and

review of images. This section is divided into:

Enable text in image on the serial port.

Conguring the paths.ini le to specify the communication port and text information.

Enabling and conguring the function using the web pages.

To enable the serial port for text in image.

1. Select System -> Serial Ports & Telemetry.

2. Using the drop down list associated with the serial port that will be connected to the

peripheral equipment select TEXT in Image.

3. The serial parameters will switch to defaults for text in image, however these (Baud

rate, Parity, Data bits, Stop bits, Flow control) can be changed as required.

4. Save conguration by selecting Save Settings!

5. Reset the unit for the settings to be applied.

Note: It is recommended that the Text in Image feature be congured via the OSD menus.

Default Settings

Camera 1 – COM1 (Serial 1)

Camera 2 – COM2 (Serial 2)

Camera 3 – COM3 (Serial 3 (Bus A))

Camera 4 – COM4 (Serial 4 (Bus B))

To congure the communication port.

1. Using an FTP client application connect to the unit.

2. Locate the \etc directory and expand.

3. Locate the paths.ini le.

4. Highlight and press the right mouse button, select edit/open.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 129 130

Sin comentarios

Dedicated Mircros Digital Sprite 2 Guia de preparacion Pagina 72