Dedicated Mircros Digital Sprite 2 Guia de preparacion Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 130
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Dedicated Micros ©2006
27
DS2 Network Guide
4. To record the audio associated with Camera 2, enable Audio in 2.
5. To record the Audio coming in from NetVu ObserVer, enable Remote Audio.
6. Enable Audio Output 1 to be able to send audio out of Output 1 (typically to a remote
speaker).
7. Enable Audio Output 2 to be able to output the audio from the camera being viewed
(either Camera 1 or Camera 2) along with any network audio (typically the control room
audio).
8. Select the base setting from which Automatic Gain Control will operate (programmable
between 1 and 15).
9. If audio is to be sent via the Line Out connection, set the level using the Audio out
Volume.
10. Make sure you save the information by selecting Save Settings!
11. Reset the unit for the settings to be actioned.
Note: Audio is available in Live monitoring at all times, the audio will only start recording after the
Record Audio option has been enabled.
Function Description
Audio Sampling Audio can be recorded at 8Hz, 16Hz or 22Hz.
Audio in 1 & Audio in 2 Enable this when recording through the audio input. Audio 1 is
associated with Camera 1, Audio 2 is associated with Camera 2.
Remote Audio Enable this to record network audio from ObserVer
Audio Output 1 Enable this to be able to send audio signals out of the unit via
Output 1 (typically used to send audio to a remote speaker).
Audio Output 2 Enable this to output the audio from the camera being viewed,
either Camera 1 or Camera 2, and network audio (typically used
as a control room monitor)
Audio in Level/AGC This option allows the Audio in level to be set, between 0 and 15.
This is the base setting from which the Automatic Gain Control
(AGC) will operate.
Audio out Volume This setting controls the level at which audio is sent via the Line
Out connection.
How to Congure the Video Inputs for VMD and Activity
The unit supports VMD (Video Motion Detection) and Activity Detection on all video inputs and
allows cameras to automatically detect if there is any movement/changes within the video scene.
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 129 130

Comentarios a estos manuales

Sin comentarios