Dedicated Mircros Digital Sprite 2 Guia de preparacion descargar pdf (Pagina 43)

DS2 Network Guide

How to Congure Alarm Presets

The unit supports the ability to automatically send a camera to a preset position on the receipt of an

alarm.

Within this web page it also possible to identify if the alarm is to be available as a trigger for an alarm

zone. To enable and congure alarm presets:

1. Select Alarms/VMD -> Alarm Presets

2. Select the camera that will be sent to the preset position from the drop down list.

3. Enter the pulse extension in seconds.

4. Select Aux or the Module number from the drop down list that the input will be triggered

from.

5. Select the contact number for the Aux input or the Module.

6. Identify if the input is normally open (not ticked) or normally closed (ticked).

7. Enter the preset position that the camera is to move to when the alarm is triggered.

8. Select whether the alarm is to be available as a zone trigger.

9. Remember to save the conguration by selecting Save Settings!

Function Description

Select Camera Select the camera that is to be congured.

Pulse extension The pulse extension extends the trigger to avoid double triggers

of alarms from occurring, i.e. if a second incident is received, after

the rst alarm has nished but within this time period, the unit will

not create a new event.

Module Number This identies the alarm input that will be the trigger for the

camera being congured, the options available are the Direct

input, Auxiliary input and Module 1 to 16 for the additional alarm

modules that can be connected to the unit.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 129 130

Sin comentarios

Dedicated Mircros Digital Sprite 2 Guia de preparacion Pagina 43