Dedicated Mircros Digital Sprite 2 Guia de preparacion Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 130
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
Dedicated Micros ©2006
13
DS2 Network Guide
5. As the unit can be connected to a LAN or WAN network it is possible to identify the
maximum bit rate for the network connection. There are default settings for LAN, WAN
and ISDN if these defaults are acceptable, select the corresponding button for your
network link, the Max trans rate, transmit image buffers and Ethernet MTU values will
be automatically congured, if these default settings are not as required, enter the new
information in the sections.
6. Enter the TCP Re-transmit Time in milliseconds, this setting should be discussed with
the Network Manager.
7. The secondary webserver port is system specic and allows a port to be allocated for
webserving if the network is already utilising the default port.
8. Remember to save the conguration by selecting Save Settings!
Function Description
IP Address, Subnet Mask, etc These are the settings that have already been congured via
the Serial port or OSD menus. This is the static IP address and
subnet mask, and if applicable default gateway.
Primary DNS This is the primary DNS server IP address for applications that are
utilising domain names.
Secondary DNS This is the IP address of the secondary DNS server in case of
failure of the primary server.
System Name This is the name that is allocated to the unit, this will be used
when transmitting alarm information to a Remote Monitoring
Station.
Base PPP IP This is the base IP address allocated to the unit. The PPP Link 1
and PPP Link 2 are automatically generated from the allocated
Base IP. PPP Link 1 takes the Base IP and PPP Link 2 will take
the next sequential IP address.
DHCP IP If the unit is to be installed in a DHCP network, this option would
display the IP address that was automatically allocated to the unit
from the DHCP Server.
DHCP Subnet If the unit is to be installed in a DHCP network, this option would
display the subnet that was automatically allocated to the unit
from the DHCP Server.
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 129 130

Comentarios a estos manuales

Sin comentarios