Dedicated Mircros Digital Sprite 2 Guia de preparacion descargar pdf (Pagina 18)

DS2 Network Guide

Baud rate, parity, etc This allows the communication settings to be congured, note

when telemetry is selected these will not be active and will default

to predetermined settings.

Once you have selected the telemetry protocol and addressed the dome/PTZ camera it is possible

to; review the image from the video input, test the control, congure the features of the camera

that are required for you application (such as presets) and access the dome/PTZ camera menus to

congure the more enhanced features supported on the dome, refer to the manufacturers manual

for the camera for these features.

Telemetry Setup Page

1. To access the set up parameters of the camera select the Telemetry Setup button on

the Camera Set-up page.

Note: When you select the Telemetry Setup button, it may take a few seconds for the page and

video to be downloaded, during this time do not continually press any buttons as this will

slow the process down.

2. The telemetry control buttons for conguration will be displayed along with camera

selection, display options and resolution selection.

This web page allows the Operator to view any of the enabled inputs on the unit, control the

telemetry connected to the system and set up any features that are required for their application

(such as presets). It is also possible to access the dome/PTZ camera menus for conguration of the

supported parameters that are only programmable from the camera menu.

Note: Review the relevant documentation for the camera to see how you navigate the camera

menus. Remember to save any conguration settings in the dome menu!

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 129 130

Sin comentarios

Dedicated Mircros Digital Sprite 2 Guia de preparacion Pagina 18