Dedicated Mircros Digital Sprite 2 Guia de preparacion descargar pdf (Pagina 29)

DS2 Network Guide

Inhibit when moving If the VMD notication is to be disabled when the Operator is

controlling the camera, enable the inhibit when moving option

Inhibit when not at park This option will enable VMD on the camera when it returns to the

park position, at all other preset positions VMD will be disabled

Preset This identies the preset position that will be the Park preset when

using the inhibit when not at park option

VMD pulse extension The pulse extension extends the trigger to avoid double triggers of

VMD from occurring, i.e. if a second incident of VMD is received

on the same input, after the rst alarm is nished, but still within

the pulse extension period the unit will treat this as a single trigger

and not create a new event.

VMD protect pre-alarm time This is the time period prior to the VMD trigger where the images

will be saved along with the VMD recording, these images will be

available for archive and will be protected from being over written.

VMD protect alarm duration This is the minimum time period in seconds from the start of the

VMD trigger that will be protected from being over written. This

time will include the VMD recording, the pulse extension and any

post alarm recording but will not include the pre-alarm images.

VMD protect period Any VMD entry in the database can be protected from being

over written, this is the period of time the les will be saved and

protected. After this time the les will be automatically over written

unless specied.

Protect VMD images indenitely It is possible to protect VMD images indenitely to ensure any

incidents are saved and protected for review at a later date. These

les will remain protected until specied differently.

Live & DuoVu Display It is possible to utilise the web interface to monitor live and

recorded video, if the Live or DuoVu are to be used it is possible

to identify when VMD and/or Activity has been triggered, squares

will appear over the area where there is movement.

To congure the alarm action on identication of VMD:

5. In the Alarms/VMD -> VMD web page there are a number of system actions that can be

automatically initiated when VMD has been triggered, each camera can be individually

congured. Place a tick in the boxes of the VMD action under the corresponding

camera input.

6. If an e-mail is to be sent on identication of an alarm it is possible to congure what

information will be contained in the e-mail, using the drop down box select the

resolution of the image to be sent.

7. Don’t forget to save the conguration of the alarm actions by selecting Save Settings!

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 129 130

Sin comentarios

Dedicated Mircros Digital Sprite 2 Guia de preparacion Pagina 29