Dedicated Micros ©2006
26
DS2 Network Guide
Note: The Record Duration at the top of the menu gives an indication of the number of days and
hours storage that can be achieved and includes Standard and Prole record settings.
Function Description
Camera Title This identies the camera title as allocated in the Camera and
Record Setup menu.
Schedule Mode This displays the operating mode. If weekend has been enabled in
the Schedule menu the will be three operating modes (Day, Night,
Weekend -default). Each of these must have a prole selected.
Normal Prole This allows the recording prole to be allocated for each camera
when the unit is in normal operation (i.e. non-alarm mode). A
prole for each operating modes must be selected from the drop
down list. The proles correspond to the JPEG and MPEG proles
congured in the Prole Setup menu.
Alarm Prole This identies the recording prole for the camera being
congured when the unit is in alarm mode (an event has been
triggered). A prole for each of the operating modes must be
selected from the drop down list. The proles correspond to the
JPEG and MPEG proles congured in the Prole Setup menu.
Pre Alarm Pictures This determines the number of images that will be continuously
recorded into the pre-alarm memory and available for enhanced
pre-alarm recording. Select a record rate in PPS (or ms) to be
recorded on the camera being congured.
Pre Alarm Rate This identies the period prior to the trigger that images will be
stored providing pre-alarm recording to allow an Operator to view
the lead up to the incident.
How to Enable Audio Recording
The unit supports two audio inputs which can allow for external audio equipment to be connected to
the unit. This allows the Operator to communicate via the Viewer software across the network to the
camera location.
The audio is independent of the video inputs which means any camera can have associated audio
equipment, e.g. Intercom system. The audio can also be recorded along side the video to allow
review of both simultaneously.
To congure and enable the audio to be recorded:
1. Select System -> Audio Recording.
2. Select the rate at which Audio will be recorded.
3. To record the audio associated with Camera 1, enable Audio in 1.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales